Accesorios de PVC Elevate

PVC Split Pipe Boot

Elevate PVC Split Pipe Boots are factory-fabricated flashings made from high-performance PVC roofing membrane. The split boot is specifically designed for flashing round penetrations of various sizes from 1" to 12" (25 mm to 305 mm). The split tab design allows the boot to be used for flash pipe penetrations with limited or no access from above the penetration. This pipe boot design eliminates the need to field fabricate with PVC Unsupported Flashing, thus lessening labor and increasing the performance of the system.

PVC Universal Pipe Flashings

Elevate PVC Universal Pipe Flashings are factory-fabricated flashings made from high-performance PVC roofing membrane. The universal boot is specifically designed for the flashing of round penetrations. PVC Universal Pipe Flashing fits various penetrations from 1" (25 mm) to 4½" (114.3 mm). The Elevate PVC Universal Pipe Flashing must be cut to correct size before installation..

PVC T-Joint Covers

Elevate PVC T-Joint Covers are a flexible, non-reinforced, flashing membrane. They are designed to cover and seal T-joints formed at seam intersections and angle changes 1:12 or greater for Elevate PVC, Elevate MAX PVC and Elevate MAX PVC XR membranes.

PVC Inside and Outside Molded Corners

Elevate PVC Inside and Outside Molded Corners were specifically designed for flashing inside and outside corners on curbs, parapets, scuppers, and other areas where an inside or outside factory formed corner flashing is appropriate.

PVC 8" Cover Strip

Elevate PVC 8" Cover Strip is a pre-cut 8" (203 mm) wide cover strip made from 60 mils (1.5 mm) thick, reinforced Elevate PVC, PVC KEE and MAX PVC membrane. This heat weldable cover strip can be used as a cover for intermediate or perimeter mechanical attachment on these membrane systems as well as for stripping in PVC or MAX PVC Coated Metal roof edge details and Elevate PVC XR, PVC KEE XR and MAX XR membrane end laps.

Unsupported PVC Flashing

Elevate PVC Unsupported Flashing is a non-reinforced PVC membrane and may be used in roofing applications where Elevate pre-formed PVC accessory products are not appropriate. Elevate PVC Unsupported Flashing is available in 50' (15.2 m) rolls.

MAX PVC Stack Flashing

Elevate MAX PVC Stack Flashings provide a durable, watertight solution for round penetrations in roofing projects. Crafted from reinforced PVC membrane, these prefabricated flashings ensure long-lasting performance. Available in white, tan, and gray, and in various diameters, the flashings are oversized to accommodate various pipe sizes, delivering precise, reliable coverage.

MAX PVC Reinforced Membrane Flashing

Elevate MAX PVC Reinforced Membrane Flashing is a flexible, durable solution for low-slope applications. Featuring polyester weft-inserted reinforcement, it ensures superior strength and flexibility. Available in various thicknesses and widths, it can be adhered, mechanically fastened, or induction welded. Compatible with Elevate MAX PVC systems, this flashing meets ASTM D 4434 standards for performance and reliability.

MAX PVC Inside and Outside Corner

Elevate MAX PVC Inside and Outside Corners deliver a watertight, durable solution for all corner areas in roofing projects. Made from reinforced PVC membrane, these prefabricated corners ensure long-lasting protection. Available in white, tan, gray, and charcoal, each corner measures 6" x 6", providing reliable coverage for a secure roofing system.

MAX PVC T-Joint Cover

Elevate MAX PVC T-Joint Cover are designed to provide a reliable seal at T-joints and seam intersections for Elevate MAX PVC reinforced membranes. Made from reinforced PVC, they ensure long-lasting protection, particularly at angle changes of 1:12 or greater, to maintain the integrity of the roofing system.

MAX PVC Walkway Pad

The Elevate MAX PVC Walkway Pad is a non-skid, maintenance-free solution designed to protect heavily traveled rooftop areas. Made from recycled membrane and reinforced with oriented-strand polyester, it provides durable protection around mechanical equipment and under sleepers. Featuring factory-attached membrane skirts for heat welding, it ensures secure attachment to the field membrane. Elevate MAX PVC Walkway Pads are offered in white, gray, tan and white with yellow safety skirts.

PVC X-Tred Walkway Pad

The Elevate PVC X-Tred Walkway Pad is a highly specialized UV resistant pad made from PVC and designed to provide protection from essential rooftop services and traffic and maintain the integrity of the existing roof surface. PVC X-Tred Walkway Pads can be installed loose-laid on top of the new or existing PVC adhered roof assembly, making installation simple

PVC Walkway Pad

The Elevate PVC Walkway Pad is a reinforced thermoplastic material intended for use as a traffic bearing surface over Elevate PVC and PVC KEE roofing installations. The pad is produced in 30" (762 mm) wide by 60' (18.3 m) long rolls; gray in color or safety yellow to highlight traffic and maintenance pathways. The pad has a textured top surface and a smooth bottom surface for easy welding to the Elevate PVC roof membrane

Twin Jet

Twin Jet is a two-component, low-rise polyurethane adhesive applied in bead pattern for the attachment of Elevate approved roof insulations. It may also be used in bead or spatter pattern for the attachment of Elevate PVC XR, PVC KEE XR and MAX PVC XR membrane to acceptable horizontal substrates, per Elevate specifications. Twin Jet is packaged in portable pressurized canisters, allowing extrusion of Part 1 and Part 2 to the gun and mix tip assembly.

Jet Bond PVC

Elevate Jet Bond PVC is a Low VOC sprayable bonding adhesive designed for portability and ease of-use. Es un producto versátil que requiere un tiempo mínimo de evaporación. Jet Bond PVC adheres standard Elevate PVC and MAX PVC (non-fleece) membranes to multiple substrates. Jet Bond PVC is not approved for use with Elevate PVC KEE membranes. Es perfecto para contratistas que buscan una alternativa más conveniente a las aplicaciones de roll-on tradicionales.